This is the flexipipe which joins the fuel pipe on the engine to the pipe from the filter. Continuing the pipe run, it rises from the flexipipe, up the right fender to the filter.

Both fenders took quite a bit of adjustment, on and off the Jeep, in order for the existing holes to line up, and new ones to be drilled in the new sections welded in. The hood then needed further adjusting in order that it fit around the instrument cowl neatly and the gaps along the fenders weren't too big.

Finally looking almost complete again!

The passenger seat with its olive drab drying. The transmission cover and gear lever gaters fitted.

The passenger seat fitted. Final O/D coat drying on the fender.

ASSEMBLY 1  ASSEMBLY 2  ASSEMBLY 3  ASSEMBLY 4  ASSEMBLY 5  ASSEMBLY 6

ASSEMBLY 7  ASSEMBLY 8  ASSEMBLY 9  ASSEMBLY 10  ASSEMBLY 11  ASSEMBLY 12  ASSEMBLY 13

HOME